SCHERTLER AROUND THE GLOBE
Integrated Systems Success for Schertler
A successful ISE show confirmed that Schertler is now becoming part of the system integration world. As first time exhibitors at this established international exhibition in Amsterdam, the team demonstrated a range of professional audio products (including the Arthur modular and new Prime mixers) to visitors from all over the world.
Aside from the new business opportunities offered by potential customers from the House of Worship, AV and System Integration sectors, Stephan Schertler made some further discoveries: “Many people visiting our booth from the audio rental service sector seemed to be focussing more on analogue audio quality than on digital systems. This, together with the interest from other sectors, made us very aware the Schertler is definitely a part of the integrated systems world and definitely not just an MI company!”
The show also provided an opportunity to discuss new distribution agreements in several new territories.
SCHERTLER AROUND THE GLOBE
Guitar recording is a breeze with new ARTHUR set-up
The winter holidays provided a perfect opportunity for Schertler customer Ulrich Schmitt to thoroughly test his new ARTHUR mixer. Used as part of his studio guitar recording set-up, Schmitt was excited to see how the compact channel configuration - Mic In, Yellow Instrument In, Stereo In and L/R Master - would perform. He takes up the story:
“Over the holidays, I had some time to extensively test the new Schertler (Arthur) mixer and I have to say: I’m delighted! Up to now I’d had a small mixer from a well-known English manufacturer (albeit “Made in China”), through which I configured a wet-dry-wet setup for my guitar recording. I have a choice of two guitar preamps: an ADA App-1 pedal preamp, which has an effect loop and an “Effectrode Blackbird” tube preamp, which has both a normal and a transformer balanced output. With these preamps I can switch in various overdrive pedals as required, after which the signal is split. One signal goes (without any further effects) into the audio interface and from there into Cubase. The other goes to the mixer and is fed, via an Aux, into a stereo effect chain (Phaser, Flanger, Chorus, Delay, Reverb). This is returned via the mixer’s Stereo In then fed, via the Master output, into two further audio interface inputs and on into Cubase. Here I can mix the stereo signal with the dry signal as desired.
Up to now I had a problem: in the stereo effect chain there was always a slight audible noise or “sizzle” (call it what you will), which is very distracting in quieter passages. I thought this might be down to the digital effect pedals, which don’t always tolerate one another too well in every combination.
My previous mixer has now been replaced by Arthur. In this latest set-up, I connected the ADA preamp to Arthur’s unbalanced Yellow (Instrument In) channel, and the Effectrode Blackbird to the balanced Mic In channel (Line option). Via Aux Send 1 (pre fader) the signal goes to the L/R Master channel and from there, via Aux 1, into my stereo effect pedal. Both preamps are not of course running simultaneously - I just use one or the other according to the sound requirement. However, using two input channels (Yellow and Mic In) saves having to plug and unplug. Back comes the stereo signal, via the Stereo In channel, which then goes via the two main outputs to the audio interface and from there into the PC and Cubase (same as I did before in principle).
With the new set-up complete, it was finally time for the moment of truth: everything switched on, mixer and tube preamp warmed up, followed by … the first chord on my Les Paul. What more can I say - it blew my socks of!! No noise, no sizzle, no hum - nothing! Whatever effect combination I tried, there was no noise. Best of all, the sound of my stereo effects was clear, three-dimensional, wide and vibrant, with a depth I had never heard until now. It is simply phenomenal! I am completely thrilled and now know two additional things: firstly, that the noise was not always being generated by the effect devices and secondly, that a mediocre mixer can actually cause a lot of noise. I really hadn’t expected that and am therefore totally satisfied and very happy with my new Schertler mixer and my set-up!”
NEWS FROM THE LAB
Alternative performance power from Hugo’s customised STAT-B
Hugo Sierro is a technician based in Sion (Wallis, Switzerland). He repairs guitar and bass amps, produces handmade moving coil microphones and also teaches guitar. When professional double bass player Patrick Perrier wanted some alternative performance power capability from his Schertler STAT-B pickup, he turned to Hugo for inspiration in the form of a customised pedal. Patrick wanted a pedal that could give power supply to his STAT-B (while he plays double bass) and provide two different volumes: one for rhythm and one for solos. Rising to the challenge, Hugo created the pedal as specified. Two external buttons are used to set the two volumes (rhythm and solo). The actual preamp Gain is inside the pedal. The pedal can be used with a normal 9v battery or with an external power supply. For its housing, Hugo took a BOSS DS1 pedal box and painted it in black before finally adding the Schertler sticker. This is some customisation!
Don’t try this at home! In general, we do not recommend modifying any Schertler product as this will void its warranty.
The above story is a rather exceptional example … Find out more about Hugo Sierro at http://www.hugosierro.ch/
NEWS FROM THE LAB
Hum and how to prevent it!
This annoying and unwanted sound can potentially ruin a great performance or recording experience. So how can it be prevented? There is an interesting article by Bruce Bartlett, (author of Practical Recording Techniques and Recording Music on Location), which looks at some causes of hum and provides useful suggestions for keeping your audio “clean”. Read the full aricle here.