DIGIT BABY

Following the outstanding response to the DIGIT ONE and TWO loudspeaker series, the product range is enriched with the arrival of DIGIT BABY, a complete loudspeaker system comprising 200W RMS active subwoofer, 100W RMS satellite and 4-channel mixer with internal digital reverb. The sub (with 8” speaker) amplifies the passive satellite and delivers the warm, rich bass response that is typical of SR. The satellite is equipped with 2x 4” speakers and a compression driver for crystal clear sound. DIGIT BABY’s built-in digital Class D amplifier features SR’s specially designed switching power supply.

Developed with small/medium size venues and performance applications in mind,  such as piano bars, solo instrumentalists and jazz bands, DIGIT BABY is also highly suitable for the amplification of percussion and small wind instruments.

The DIGIT series reinforces the company’s commitment to creating and developing sound reinforcement systems that always reflect the needs of the market. Featuring compact dimensions and lighter weight, the transport friendly systems are suitable for a range of applications.

Every aspect has been carefully researched and developed, from the SWITCHING power supply and DIGITAL amplifiers, to the wooden cabinets - a process that has involved highly qualified engineers and technicians, leading-edge technologies and expert collaborators. The result is a high quality product series with absolutely no compromise.

Frequency response 150 Hz-  18 kHz
Sensitivity @ 1W/1m 95.0  dBSPL
SPL max (calc.) 114.0  dBSPL
Crossover Passive - 18dB/octave
  2.0 kHz
LF Transducer Double 4" Woofer
  Ferrite magnet circuit
  Voice coil diameter 25 mm
HF Transducer Dome tweeter 1" voice coil
  Voice Coil diameter: 25 mm
  110°x110° (H x V)
Power Handling (Continuous/Peak) 100W/180W
Connection Speakon Input
Nominal Impedance (Passive) 8 Ω
Controls No control
Box 12 mm Plywood
  2 way
Stand Mounting Top hat composed
  of welded steel tube ø 36 mm, h=77 mm
Weight kg 4
Dimensions (LxDxH) 135 x 374 x 160 mm
Frequency response 55 Hz-  150 Hz
Sensitivity @ 1W/1m 96.0  dBSPL
SPL max (calc.) 117.0  dBSPL
Crossover Electronic - 24dB/octave  150 Hz
LF Transducer 8" Woofer
  Ferrite magnet circuit
  Voice coil diameter 50 mm
Power Handling (Continuous/Peak) 200W/350W
Connection XLR mic in (2), JACK line (6), Speakon Output
   JACK main out (2), XLR ext out
Impedance 1 kΩ @ 1 kHz for XLR mic
  10 kΩ @ 1 kHz for JACK line
Input sensitivity All XLR mic -37 dBu (10,94  mVrms)
  All Line Input 0 dBu (0.775 Vrms)
Controls Gain-Hi-Mid-Low-Fx-Vol (Ch 1-2), Fx master
  Gain-Hi-Mid-Low-Fx-Vol and Brilliance (Ch 3),
   Hi-Low-Vol (Ch 4), Ext Vol , Main Vol, Ground Lift Switch
Box 15 mm Plywood
  bass reflex
  Top hat composed
  of welded steel tube ø 36 mm, h=77 mm
Weight kg 10
Dimensions (LxDxH) 285 x 345 x 415 mm
Still no content available ×
  • Digit product presentation
×
Still no content available×

#stephan_music_and_emotion_06.07.2017

MUSIC and EMOTION

Stephan Schertler introduces this issue with an insight into the company’s motivation for developing new products.

More information on Schertler Acoustics at www.schertler.com .

×
Still no content available×
Still no content available ×

Related Products