STAT B PRO VIN

STAT B PRO VIN
$ 839,00
extra bag stat
$ 25,00
cable jack-jack
$ 39,00
extra cable stat-bcm
$ 59,00
extra cork
$ 4,00

available

The STAT Series of contact microphones has been specially designed to bring out the best sound qualities of bowed stringed instruments in louder musical environments, or in performance situations involving high levels of amplification.

Stephan Schertler’s original bridge-mounted STAT-B is a simple system that effectively reproduces the complex tone of the double bass and also works with any bass amplifier.

STAT-B-VIN (dual sensor) is remarkable for its high resistance to feedback, making it an ideal system for amplified rock, jazz or fusion performances.

STAT-B PRO-VIN includes the pickup, putty, cable and Schertler’s sophisticated YELLOW SINGLE preamp with regulated AC power supply. The preamp enables players to control a range of parameters including gain, EQ and resonance.

Nominal impedance 1.6 Kohm
Frequency Response 20 Hz to 12 kHz
Dynamic range 75 dB
Sensitivity (on instrument) ca. -25 dB
Temperature range -10° C to +50° C
Contacts Gold plated
Connection Chinch (RCA) to 1/4" jack
Weight 0.32 kg (0.68lb)
Dimensions 15x10x3.8cm (5.9x4.25x1.49 in)
Frequency Response 10 Hz to 25 kHz (+/- 3dB)
Construction Anodized aluminium box
Mic Input MIC IN: XLR balanced
  Sensitivity: -56 dB
  Impedance: 4.7 Kohm
  LINE IN: 1/4" Jack
  Sensitivity: -52 dB
  Impedance: 3 Kohm with 10V on
  Impedance: 200 Kohm with 10V off
RETURN/LINE input 1/4" stereo balanced Jack
  Sensitivity: -30 dB
  impedance 22 Kohm
EQ

4 band EQ + adjustable notch filter

  warm and low cut
MASTER OUTPUTS XLR balanced, output level +20 dBu
  Impedance 100 ohm
  1/4" Jack unbalanced, output level +14 dBu
  Impedance 100 ohm
DI output XLR balanced, sensitivity +5 dBu
  Impedance 100 ohm
SEND output XLR balanced, sensitivity +5 dBu
  Impedance 100 ohm
Headphone High class headphone preamplifier
  1/8" Jack, sensitivity +10 dBu
  Impedance 10 ohm
Supply 24VDC 210 mA regulated power supply
Still no content available ×
  • stat b
×

How it's made - Stat

The housing, which contains the transducer element, gets glued to the cork piece.
The cork piece transmits the vibrations from the bridge to the electrostatic sensor, which then transforms the mechanical vibrations into an electrical signal.

"All pickup products and preamps are manufactured in Mendrisio, Switzerland. Most of the components are produced in our in-house workshop facilities where we have two CNC tooling machines, turning lathes and milling machines, a laser cutter, pneumatic presses, casting devices and obviously a well equipped electronic laboratory. "

×
Still no content available×
Still no content available×
Still no content available ×

Related Products